{"title":"Wildmesh","description":"\u003cp data-path-to-node=\"5\"\u003eWelcome to the official \u003cb data-index-in-node=\"24\" data-path-to-node=\"5\"\u003eWildmesh\u003c\/b\u003e (formerly \u003cb data-index-in-node=\"43\" data-path-to-node=\"5\"\u003eDen of Imagination\u003c\/b\u003e) collection at CT Miniatures UK. Renowned for their intricate \u003cb data-index-in-node=\"124\" data-path-to-node=\"5\"\u003emodular miniatures\u003c\/b\u003e and aggressive \u003cb data-index-in-node=\"158\" data-path-to-node=\"5\"\u003egrimdark aesthetics\u003c\/b\u003e, Wildmesh provides the ultimate toolkit for \u003cb data-index-in-node=\"222\" data-path-to-node=\"5\"\u003ecustomizing sci-fi armies\u003c\/b\u003e. Whether you are looking for \u003cb data-index-in-node=\"277\" data-path-to-node=\"5\"\u003eCyber-Constructs\u003c\/b\u003e, \u003cb data-index-in-node=\"295\" data-path-to-node=\"5\"\u003eSpace Dwarf\u003c\/b\u003e alternatives, or specialized \u003cb data-index-in-node=\"336\" data-path-to-node=\"5\"\u003einfantry conversion bits\u003c\/b\u003e, this range is designed for seamless integration with 32mm heroic scale wargames.\u003c\/p\u003e","products":[{"product_id":"demonic-prince-of-excess-den-of-imagination-tabletop-wargaming-miniature-grim-dark-sci-fi-proxy-copy","title":"Demonic Prince of Excess | Children of Excess","description":"\u003cp\u003eDemonic Prince of Excess - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 60mm base.\u003c\/p\u003e\n\u003cp\u003eThis kit is provided with a selection of weapons, backpacks and wing options to offer ultimate flexibility and value for money!\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49518125580631,"sku":"SKU-DEMPRI-DA8N","price":27.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/Prince_2.webp?v=1758617114"},{"product_id":"haunted-gladiators-of-excess-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Haunted Gladiators | Children of Excess","description":"\u003cp\u003eSet of 5 or 10 Haunted Gladiators of Excess - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with 40mm Scenic bases\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"5 Models","offer_id":49843467059543,"sku":"SKU-HAUGLA-6GMN-1","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"10 Models","offer_id":49843467092311,"sku":"SKU-HAUGLA-6GMN-2","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/HG1.jpg?v=1758616780"},{"product_id":"haunted-gladiators-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Haunted Gladiators | Void Blessed","description":"\u003cp\u003eSet of 5x Haunted Gladiators - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49518162248023,"sku":"SKU-HAUGLA-ASON","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/haunted-gladiators-1.jpg?v=1758717424"},{"product_id":"haunted-gladiators-of-change-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Haunted Gladiators of Change","description":"\u003cp\u003eSet of 5x Haunted Gladiators of Change - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out our main website at \u003ca href=\"https:\/\/ctminiaturesuk.com\" title=\"CT Miniatures UK\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: rgb(142, 6, 169);\"\u003ehttps:\/\/ctminiaturesuk.com\u003c\/span\u003e\u003c\/a\u003e for further discounts and offers! (At least 10-15% cheaper than our Etsy Store)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49519040790871,"sku":"SKU-HAUGLA-FQ4N","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/haunted-gladiators-change1.png?v=1772964050"},{"product_id":"plague-tank-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Plague Battle Tank | Plague Blessed","description":"\u003cp\u003ePlague Battle Tank - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with multiple Turret and Sponson weapon options\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out our main website at \u003ca href=\"https:\/\/ctminiaturesuk.com\" title=\"CT Miniatures UK\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: rgb(142, 6, 169);\"\u003ehttps:\/\/ctminiaturesuk.com\u003c\/span\u003e\u003c\/a\u003e for further discounts and offers! (At least 10-15% cheaper than our Etsy Store)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49519051800919,"sku":"SKU-PLATAN-7NSN","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/tank1.png?v=1772964126"},{"product_id":"plague-transporter-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Plague Transporter | Plague Blessed","description":"\u003cp\u003ePlague Transporter - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out our main website at \u003ca href=\"https:\/\/ctminiaturesuk.com\" title=\"CT Miniatures UK\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: rgb(142, 6, 169);\"\u003ehttps:\/\/ctminiaturesuk.com\u003c\/span\u003e\u003c\/a\u003e for further discounts and offers! (At least 10-15% cheaper than our Etsy Store)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49519062188375,"sku":"SKU-PLATRA-5MON","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/trans1.png?v=1772964177"},{"product_id":"plague-corruptor-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Plague Corruptor | Plague Blessed","description":"\u003cp\u003ePlague Corruptor - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with numerous weapon options - this is a HUGE kit!\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49519104491863,"sku":"SKU-PLACOR-AKGN","price":37.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/background-editor_output_6be91d24-be9f-450f-ab75-7f7aef5e0aaf.png?v=1759084262"},{"product_id":"plague-ironclad-tank-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Plague Ironclad Tank | Plague Blessed","description":"\u003cp\u003ePlague Ironclad Tank - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with multiple turret and sponson options\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49689748111703,"sku":"SKU-PLAIRO-B4ON","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/tank1_98c91745-c9d1-49db-b45d-7c34a39f74d8.png?v=1772964223"},{"product_id":"plague-tank-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing-1","title":"Plague Tank | Plague Blessed","description":"\u003cp\u003ePlague Tank - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with multiple Turret and Sponson weapon options\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49689760694615,"sku":"SKU-PLATAN-12GN","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/tank2_1.png?v=1772964278"},{"product_id":"plague-sons-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Plague Sons | Plague Blessed","description":"\u003cp\u003ePlague Sons - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSet of 7x Plague Sons supplied with 32mm bases and a massive stash of weapon options\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49689764299095,"sku":"SKU-PLASON-DHUN","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/background-editor_output_e9ab1e1e-174b-4828-85c9-3e27724124e7.png?v=1759083322"},{"product_id":"plague-sorcerer-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Plague Sorcerer | Plague Blessed","description":"\u003cp\u003ePlague Sorcerer - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003e1x Plague Sorcerer supplied with scenic base and a selection of head and weapon options\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49689773572439,"sku":"SKU-PLASOR-708N","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/background-editor_output_e9fcd450-7ad7-48a6-ac95-2417d84cb55b.png?v=1759083099"},{"product_id":"plague-alchemist-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Plague Alchemist | Plague Blessed","description":"\u003cp\u003ePlague Alchemist - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 32mm base\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49689835012439,"sku":"SKU-PLAALC-J0ON","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/background-editor_output_c7e1a576-1b3b-4099-9379-4ef96fb18aef.png?v=1759082996"},{"product_id":"plague-chosen-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Plague Chosen | Plague Blessed","description":"\u003cp\u003ePlague Chosen - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 32mm base\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49689848578391,"sku":"SKU-PLACHO-HQ0N","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/background-editor_output_3dfa0f68-3d16-4cb9-94fb-c659fd85306c.png?v=1759082894"},{"product_id":"master-of-disease-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Master of Disease | Plague Blessed","description":"\u003cp\u003eMaster of Disease - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 32mm base\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49689856999767,"sku":"SKU-MASOF-NON","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/background-editor_output_033a234b-b041-4602-9db5-b38f90c0d115.png?v=1759082778"},{"product_id":"plague-sorcerer-in-annihilator-armor-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Plague Sorcerer in Annihilator Armor | Plague Blessed","description":"\u003cp\u003ePlague Sorcerer in Annihilator Armor - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 40mm base\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49689895010647,"sku":"SKU-PLASOR-O6SN","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/background-editor_output_b2061640-3475-43df-a8a4-0a5cca167dd0.png?v=1759082672"},{"product_id":"plague-demons-on-flies-tabletop-miniature-d-d-wargaming-grimdark-onepagerules-scifi-3d-printing","title":"Plague Demons on Flies | Plague Blessed","description":"\u003cp\u003eSet of 3x Plague Demons on Flies - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49689914671447,"sku":"SKU-PLADEM-8SON","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/background-editor_output_efcabcf8-17e0-4baf-82e6-86a0aba650fb.png?v=1759082520"},{"product_id":"greater-plague-demon","title":"Greater Plague Demon | Plague Blessed","description":"\u003cp\u003eGreater Plague Demon - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eA disgusting model supplied with multiple weapon and head options plus a 130mm scenic base - Huge kit!\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Style 1","offer_id":49847505518935,"sku":"SKU-GREPLA-DIKN-1","price":47.5,"currency_code":"GBP","in_stock":true},{"title":"Style 2","offer_id":49847505551703,"sku":"SKU-GREPLA-DIKN-2","price":47.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/background-editor_output_edb9eb7f-20de-4be1-8ec4-37e138e523dd.png?v=1759082423"},{"product_id":"abductor-prime-hive-kelth","title":"Abductor Prime | Hive Kelth","description":"\u003cp\u003eHive Abductor - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 75mm scenic base and multiple modular parts\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical prints all sculpts we offer.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49764608737623,"sku":"ABDPRIHIV-2O4N","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/HiveKelth-AbductorPrime.png?v=1772964334"},{"product_id":"heavy-artillery-hive-kelth","title":"Heavy Artillery | Hive Kelth","description":"\u003cp\u003eHeavy Artillery - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 120mm scenic base\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical prints all sculpts we offer.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Devourer","offer_id":49764691771735,"sku":"HEAARTHIV-RJKN-1","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"Standing","offer_id":49764691804503,"sku":"HEAARTHIV-RJKN-2","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"Shooting","offer_id":49764691837271,"sku":"HEAARTHIV-RJKN-3","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/hartchart.png?v=1772964389"},{"product_id":"living-artillery-hive-kelth","title":"Living Artillery | Hive Kelth","description":"\u003cp\u003eLiving Artillery - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 80mm scenic base\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical prints all sculpts we offer.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Post 1","offer_id":49764696326487,"sku":"LIVARTHIV-EBON","price":17.5,"currency_code":"GBP","in_stock":true},{"title":"Pose 2","offer_id":49764696359255,"sku":"LIVARTHIV-EBON-2","price":17.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/artchart.png?v=1772964441"},{"product_id":"ultrafex-prime-hive-kelth","title":"Ultrafex Prime | Hive Kelth","description":"\u003cp\u003eUltrafex Prime - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 100mm scenic base\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical prints all sculpts we offer.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49764784374103,"sku":"ULTPRIHIV-EQSN","price":27.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/ultra1-got.png?v=1772964527"},{"product_id":"nest-wardens-hive-kelth","title":"Nest Wardens | Hive Kelth","description":"\u003cp\u003e6x Nest Wardens - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with 50mm scenic bases\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical prints all sculpts we offer.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49765001494871,"sku":"NESWARHIV-BAQN","price":37.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/mmf-ww17-hiveguard-gun-5-1080x1080-1.png?v=1772964601"},{"product_id":"devourer-hive-kelth","title":"Devourer | Hive Kelth","description":"\u003cp\u003eDevourer - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 120mm scenic base\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical prints all sculpts we offer.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49765014405463,"sku":"DEVHIVKEL-BP4N","price":27.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/dev3-mmf.png?v=1772964653"},{"product_id":"annihilators-of-excess-children-of-excess","title":"Annihilators of Excess | Children of Excess","description":"\u003cp\u003eSet of 5 or 10 Annihilators of Excess - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSets are provided with all the appropriate bolters\/heavy weapons and melee weapons you'd expect a chunky unit of termination to possess.\u003c\/p\u003e\n\u003cp\u003eSupplied with 40mm Scenic bases.\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"5 Models","offer_id":49769160835415,"sku":"ANNOFEXC-8BKN","price":27.5,"currency_code":"GBP","in_stock":true},{"title":"10 Models","offer_id":49769160868183,"sku":"ANNOFEXC-8BKN-2","price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/December-files_update_-_1.jpg?v=1758616738"},{"product_id":"sons-of-excess-children-of-excess","title":"Sons of Excess | Children of Excess","description":"\u003cp\u003eSet of 6 or 12 Sons of Excess - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eKit is provided with a selection of multipart options allowing for squad customisation.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"6 Models","offer_id":49843535970647,"sku":"SONOFEXC-7IMN","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"12 Models","offer_id":49843536003415,"sku":"SONOFEXC-7IMN-2","price":37.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/soe.jpg?v=1758616648"},{"product_id":"excess-freaks-children-of-excess","title":"Excess Freaks | Children of Excess","description":"\u003cp\u003eSet of 3 or 6 Excess Freaks - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with 75x42mm Scenic bases.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"3 Models","offer_id":49843569787223,"sku":"EXCFRECHI-GHIN","price":27.5,"currency_code":"GBP","in_stock":true},{"title":"6 Models","offer_id":49843569819991,"sku":"EXCFRECHI-GHIN-2","price":37.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/grup1.jpg?v=1758616486"},{"product_id":"excess-lord-children-of-excess","title":"Excess Lord | Children of Excess","description":"\u003cp\u003eExcess Lord - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 40mm base.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49843606585687,"sku":"EXCLORCHI-6VSN","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/excess-lord.webp?v=1758869556"},{"product_id":"excess-sorceror-children-of-excess","title":"Excess  Sorcerer | Children of Excess","description":"\u003cp\u003eExcess Sorcerer - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 40mm scenic base.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49843608191319,"sku":"EXCSORCHI-QVSN","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/Sorcerer_3.webp?v=1758723485"},{"product_id":"succubus-children-of-excess","title":"Succubus | Children of Excess","description":"\u003cp\u003eSet of 5 or 10 Succubus - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with 25mm Scenic bases.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"5 Models","offer_id":49843631194455,"sku":"SUCCHIOF-LUON","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"10 Models","offer_id":49843631227223,"sku":"SUCCHIOF-LUON-2","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/suc1.jpg?v=1758616030"},{"product_id":"eradicators-of-excess-children-of-excess","title":"Eradicators of Excess | Children of Excess","description":"\u003cp\u003eSet of 5 or 10 Eradicators of Excess - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with 32mm Scenic bases.\u003c\/p\u003e\n\u003cp\u003eKit is provided with a selection of multipart options allowing for squad customisation.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"5 Models","offer_id":49843634602327,"sku":"ERAOFEXC-3E6N","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"10 Models","offer_id":49843634635095,"sku":"ERAOFEXC-3E6N-2","price":37.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/erad1.jpg?v=1758615876"},{"product_id":"grand-succubus-children-of-excess","title":"Grand Succubus | Children of Excess","description":"\u003cp\u003eGrand Succubus - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eThis model can be provided in 2 different sizes;\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScaled to fit on a 60mm base to be used as a Saucy Daemonic Princess\u003c\/li\u003e\n\u003cli\u003eScaled to fit on a 100mm base to be used as a Very Saucy and Secretive Seductress\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"60mm Base","offer_id":50878561222999,"sku":"GRASUCHIC-KE6N-1","price":27.5,"currency_code":"GBP","in_stock":true},{"title":"100mm Base","offer_id":50878561255767,"sku":"GRASUCHIC-KE6N-2","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/gS123_0faed2f9-fbd4-4f2a-af86-187fc295f0bd.jpg?v=1758615714"},{"product_id":"juggernaut-of-excess-children-of-excess","title":"Juggernaut of Excess | Children of Excess","description":"\u003cp\u003eJuggernaut of Excess - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eThis delicious set is provided with a TON of weapons options - perfect for some Magnetisation! Included are; Autocannon, Flamer, Hammer, Laser Canon, Melta Cannon, Plasma Cannon, Rocket Launcher, Twin Bolter and Tentacles! Yikes!\u003c\/p\u003e\n\u003cp\u003eSupplied with a 60mm scenic base.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49864820425047,"sku":"JUGOFEXC-140N","price":27.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/Juggernout2.webp?v=1758716968"},{"product_id":"the-fabulous-surgeon-children-of-excess","title":"The Fabulous Surgeon | Children of Excess","description":"\u003cp\u003eThe Fabulous Surgeon - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 40mm base\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49871783297367,"sku":"THEFABSUR-KICN","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/fabulous_surgeon1.png?v=1758722879"},{"product_id":"the-guitar-of-hell-children-of-excess","title":"The Guitar of Hell | Children of Excess","description":"\u003cp\u003eThe Guitar of Hell - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with a 32mm scenic base.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49871828320599,"sku":"THEGUIOF-1OQN","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/Guitarist2.webp?v=1758723206"},{"product_id":"space-dwarf-surveyor-scouts-khazaroth-empire","title":"Surveyor Scouts | Khazaroth Empire","description":"\u003cp\u003e10x Space Dwarf Surveyor Scouts - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eProvided with multiple weapon\/loadout options and 28mm bases \u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical prints designed by this creator\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":49916485730647,"sku":"SPADWASUR-66GN","price":22.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/sc2-_1.jpg?v=1758788412"},{"product_id":"space-dwarf-exosuit-stonecrushers-khazaroth-empire","title":"Exosuit Stonecrushers | Khazaroth Empire","description":"\u003cp\u003eSpace Dwarf Exosuit Stonecrushers - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eProvided with multiple weapon\/loadout options and 40mm bases\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical prints designed by this creator\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"3 Models","offer_id":51779175350615,"sku":"SPADWAEXO-FIIN-1","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"6 Models","offer_id":51779175383383,"sku":"SPADWAEXO-FIIN-2","price":32.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/Exosuits1-_1.jpg?v=1758787964"},{"product_id":"space-dwarf-prospectors-khazaroth-empire","title":"Prospectors | Khazaroth Empire","description":"\u003cp\u003eSet of 5 or 10 Space Dwarf Prospectors - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eProvided with multiple weapon\/loadout options and 40mm magnetisable bases\u003c\/p\u003e\n\u003cp\u003eIf you require any specific adjustments, please use the Personalisation box and let me know, i'll happily customise whatever you need.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical prints designed by this creator\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"5 Models","offer_id":49916532359511,"sku":"SPADWAPRO-KVON-1","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"10 Models","offer_id":49916532392279,"sku":"SPADWAPRO-KVON-2","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/mmf-ww14p-03-kazaroth-empire-prospectors-upgrade-1080x1080.jpg?v=1758717239"},{"product_id":"caligula-avatar-of-vice-children-of-excess","title":"Caligula, Avatar of Vice | Children of Excess","description":"\u003cp\u003eCaligula, Avatar of Vice, Champion of Luxor - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eSupplied with 3 interchangeable heads and 3 left and 3 right arms for a customizable setup.\u003c\/p\u003e\n\u003cp\u003eIncludes 130mm base.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":50019292447063,"sku":"CALAVAOF-G24N","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/Caligila_MMF_22.webp?v=1758723948"},{"product_id":"decimators-of-excess-children-of-excess","title":"Decimators of Excess | Children of Excess","description":"\u003cp\u003e3x Decimators of Excess - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eA multipart set with 3 bodies and 3 sets of arms, allowing you to mix and match for endless assembly possibilities. 50mm bases included\u003c\/p\u003e\n\u003cp\u003eKit is provided with a selection of multipart options allowing for squad customisation.\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":50019583099223,"sku":"DECOFEXC-N4IN","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/DeciExAll.jpg?v=1758614454"},{"product_id":"space-dwarf-bulldozer-khazaroth-empire","title":"Bulldozer | Khazaroth Empire","description":"\u003cp\u003eSpace Dwarf Bulldozer - (Designed by Den of Imagination)\u003c\/p\u003e\n\u003cp\u003eProvided with all weapon options and plenty of customisation bits!\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical prints designed by this creator\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":50165713371479,"sku":null,"price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/Buldo1.jpg?v=1758717122"},{"product_id":"chaos-lord-of-sickness-plague-blessed","title":"Lord of Sickness - Plague Blessed","description":"\u003ch2\u003e🔥 Lord of Sickness - Plague Blessed\u003c\/h2\u003e\n\u003cp\u003eClad in rusted plates and fetid trophies, the Lord of Sickness is the iron will behind the rot.\u003c\/p\u003e\n\u003cp\u003eA brutal battlefield commander with presence to match, this sculpt emphasises corrupted authority with heavy armour and plague-wreathed weaponry.\u003c\/p\u003e\n\u003cp\u003eDesigned as a \u003cstrong\u003eLord of Contagion-style proxy\u003c\/strong\u003e, this miniature fits seamlessly into plague‑themed forces for grimdark 28mm wargames.\u003c\/p\u003e\n\u003cp\u003eSupplied with a \u003cstrong\u003e50mm Scenic Base\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e⚔️ Key Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCommander proxy for plague‑themed forces\u003c\/li\u003e\n\u003cli\u003eSupplied with 50mm scenic base\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3D printed in premium ABS‑like resin\u003c\/li\u003e\n\u003cli\u003eUnassembled \u0026amp; unpainted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Disclaimer:\u003c\/strong\u003e This product is manufactured independently by CT Miniatures UK without authorization, license, or approval from Games Workshop Limited. CT Miniatures UK has no affiliation with Games Workshop Limited. All trademarks, including Warhammer 40,000 and any faction or character names referenced for identification (e.g., Death Guard), are the exclusive intellectual property of Games Workshop Limited and are used herein solely for identification purposes.\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":50504201109847,"sku":null,"price":13.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/LordOfSickness1.webp?v=1761212665"},{"product_id":"chaos-plague-annihilators-plague-blessed","title":"Annihilators | Plague Blessed","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e5 or 10 Annihilators - (Designed by Den of Imagination)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSupplied with multiple weapon and head options and 40mm Scenic bases\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"5 Models","offer_id":51731542049111,"sku":null,"price":25.0,"currency_code":"GBP","in_stock":true},{"title":"10 Models","offer_id":51731542081879,"sku":null,"price":37.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/ani1-1.jpg?v=1758192873"},{"product_id":"plague-juggernaut-plague-blessed","title":"Plague Juggernaut | Plague Blessed","description":"\u003ch2\u003e🔥 Plague Juggernaut - Plague Blessed\u003c\/h2\u003e\n\u003cp\u003eFused flesh and iron drive this abomination — a relentless engine of pestilent fury.\u003c\/p\u003e\n\u003cp\u003eThe Juggernaut’s bulky frame and tortured details make it an ideal corrupted walker to anchor your lines or smash through the enemy’s.\u003c\/p\u003e\n\u003cp\u003eDesigned as a \u003cstrong\u003eHelbrute-style proxy\u003c\/strong\u003e, this miniature fits seamlessly into plague‑themed forces for grimdark 28mm wargames.\u003c\/p\u003e\n\u003cp\u003eSupplied with a \u003cstrong\u003e60mm Scenic Base\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e⚔️ Key Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCorrupted walker\/engine proxy\u003c\/li\u003e\n\u003cli\u003eSupplied with 60mm scenic base\u003c\/li\u003e\n\u003cli\u003eSupplied with multiple weapon\/arm options\u003c\/li\u003e\n\u003cli\u003e3D printed in premium ABS‑like resin\u003c\/li\u003e\n\u003cli\u003eUnassembled \u0026amp; unpainted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Disclaimer:\u003c\/strong\u003e This product is manufactured independently by CT Miniatures UK without authorization, license, or approval from Games Workshop Limited. CT Miniatures UK has no affiliation with Games Workshop Limited. All trademarks, including Warhammer 40,000 and any faction or character names referenced for identification (e.g., Death Guard), are the exclusive intellectual property of Games Workshop Limited and are used herein solely for identification purposes.\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":50504226242903,"sku":null,"price":27.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/jug3a.jpg?v=1758192585"},{"product_id":"plague-lord","title":"Plague Lord - Plague Blessed","description":"\u003ch2\u003e🔥 Plague Lord - Plague Blessed\u003c\/h2\u003e\n\u003cp\u003eClad in rusted plates and fetid trophies, the Plague Lord is the iron will behind the rot.\u003c\/p\u003e\n\u003cp\u003eA brutal battlefield commander with presence to match, this sculpt emphasises corrupted authority with heavy armour and plague-wreathed weaponry.\u003c\/p\u003e\n\u003cp\u003eDesigned as a \u003cstrong\u003eLord of Virulence-style proxy\u003c\/strong\u003e, this miniature fits seamlessly into plague‑themed forces for grimdark 28mm wargames.\u003c\/p\u003e\n\u003cp\u003eSupplied with a \u003cstrong\u003e50mm Scenic Base\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e⚔️ Key Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCommander proxy for plague‑themed forces\u003c\/li\u003e\n\u003cli\u003eSupplied with 50mm scenic base\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3D printed in premium ABS‑like resin\u003c\/li\u003e\n\u003cli\u003eUnassembled \u0026amp; unpainted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Disclaimer:\u003c\/strong\u003e This product is manufactured independently by CT Miniatures UK without authorization, license, or approval from Games Workshop Limited. CT Miniatures UK has no affiliation with Games Workshop Limited. All trademarks, including Warhammer 40,000 and any faction or character names referenced for identification (e.g., Death Guard), are the exclusive intellectual property of Games Workshop Limited and are used herein solely for identification purposes.\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":50504237613399,"sku":null,"price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/lord1.jpg?v=1758189482"},{"product_id":"plague-decimators-plague-blessed","title":"Plague Decimators | Plague Blessed","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e3x Plague Decimators - (Designed by Den of Imagination)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSupplied with multiple weapon options and 50mm Scenic Bases\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":50504248230231,"sku":null,"price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/deci2.jpg?v=1758192428"},{"product_id":"plague-grinder-plague-blessed","title":"Plague Grinder | Plague Blessed","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003ePlague Grinder - (Designed by Den of Imagination)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSupplied with multiple weapon and head options and an 80mm scenic base\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":50504264253783,"sku":null,"price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/grinder22.jpg?v=1758192165"},{"product_id":"plague-walkers","title":"Plague Walkers - Plague Blessed","description":"\u003ch2\u003e🔥 Plague Walkers (Squad of 10) - Plague Blessed\u003c\/h2\u003e\n\u003cp\u003eA shambling tide of the infected, the Plague Walkers drown the foe beneath numbers and nausea.\u003c\/p\u003e\n\u003cp\u003eTen distinct sculpts provide a ragged, unsettling horde to screen your lines or swarm objectives in style.\u003c\/p\u003e\n\u003cp\u003eDesigned as a \u003cstrong\u003ePoxwalkers-style proxy\u003c\/strong\u003e, this miniature fits seamlessly into plague‑themed forces for grimdark 28mm wargames.\u003c\/p\u003e\n\u003cp\u003eSupplied with a \u003cstrong\u003e25mm Scenic Bases (x10)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e⚔️ Key Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHorde infantry proxies for plague‑themed forces\u003c\/li\u003e\n\u003cli\u003eTen models with 25mm scenic bases\u003c\/li\u003e\n\u003cli\u003eVaried poses across the unit\u003c\/li\u003e\n\u003cli\u003e3D printed in premium ABS‑like resin\u003c\/li\u003e\n\u003cli\u003eUnassembled \u0026amp; unpainted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Disclaimer:\u003c\/strong\u003e This product is manufactured independently by CT Miniatures UK without authorization, license, or approval from Games Workshop Limited. CT Miniatures UK has no affiliation with Games Workshop Limited. All trademarks, including Warhammer 40,000 and any faction or character names referenced for identification (e.g., Death Guard), are the exclusive intellectual property of Games Workshop Limited and are used herein solely for identification purposes.\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":50504274346327,"sku":null,"price":17.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/walk1.jpg?v=1758189645"},{"product_id":"plague-icon-bearer-plague-blessed","title":"Plague Icon Bearer | Plague Blessed","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003ePlague Icon Bearer - (Designed by Den of Imagination)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"Default Title","offer_id":50504287158615,"sku":null,"price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/banner2.jpg?v=1758189565"},{"product_id":"plague-reapers","title":"Plague Reapers - Plague Blessed","description":"\u003ch2\u003e🔥 Plague Reapers - Plague Blessed\u003c\/h2\u003e\n\u003cp\u003eRelentless juggernauts of rusted putrid armour, the Plague Reapers grind forward through disease and gore.\u003c\/p\u003e\n\u003cp\u003eThese elite heavy infantry are sculpted with hulking frames and plague-warped plating, perfect as a hammer unit or bodyguard.\u003c\/p\u003e\n\u003cp\u003eThis miniature fits seamlessly into plague‑themed forces for grimdark 28mm wargames.\u003c\/p\u003e\n\u003cp\u003eSupplied with \u003cstrong\u003e40mm bases\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e⚔️ Key Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy infantry proxies for plague‑themed forces\u003c\/li\u003e\n\u003cli\u003eThree or Six models with 40mm scenic bases\u003c\/li\u003e\n\u003cli\u003eEach Armed with a huge Power Scythe\u003c\/li\u003e\n\u003cli\u003e3D printed in premium ABS‑like resin\u003c\/li\u003e\n\u003cli\u003eUnassembled \u0026amp; unpainted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Disclaimer:\u003c\/strong\u003e This product is manufactured independently by CT Miniatures UK without authorization, license, or approval from Games Workshop Limited. CT Miniatures UK has no affiliation with Games Workshop Limited. All trademarks, including Warhammer 40,000 and any faction or character names referenced for identification (e.g., Death Guard), are the exclusive intellectual property of Games Workshop Limited and are used herein solely for identification purposes.\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"3 Models","offer_id":50504299348311,"sku":null,"price":25.0,"currency_code":"GBP","in_stock":true},{"title":"6 Models","offer_id":50504299381079,"sku":null,"price":37.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/plague-reappers.jpg?v=1758183482"},{"product_id":"haunted-gladiators-of-plague-plague-blessed","title":"Haunted Gladiators of Plague | Plague Blessed","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eHaunted Gladiators of Plague - (Designed by Den of Imagination)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eA squad of 5 or 10 horribly mutated and possessed Marines to add to your Plague Army. Supplied with 40mm bases\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e🔬 3D Printed on 14K resolution printers\u003c\/p\u003e\n\u003cp\u003e🎨 Printed using our \"KFC secret recipe\" custom blend of Resin - Models are printed tough, durable and retain a wonderful level of detail. Our resin mixture produces models that are a medium to dark tone of Grey with a semi-matte appearance which makes the details absolutely POP!\u003c\/p\u003e\n\u003cp\u003e🔨 Printer resolutions and fancy secret Resin blends are only part of the story! After the printing phase comes the cleaning phase! A 2-stage ultrasonic alcohol wash followed by a delightfully warm bubble bath ensures that all that horrible scaffold and support material practically falls off the models reducing the likelihood that any support marks, pits, etc are left behind.\u003c\/p\u003e\n\u003cp\u003eAfter a nice air drying session, it's into the curing station to make sure that all that wonderful resin is cured, solid, safe to handle and most importantly PAINT!\u003c\/p\u003e\n\u003cp\u003e📦 The model will come cleaned and UV cured, ready for you to prime and paint! Please bear in mind that resin is delicate material so try to avoid dropping your minis!\u003c\/p\u003e\n\u003cp\u003e📅 Processing time on orders is typically 5-7 days, though occasionally during busy periods this might increase to 7-10 days.\u003c\/p\u003e\n\u003cp\u003e🚚 All orders are shipped via Evri Next Day Delivery or Royal Mail Tracked 24 where possible. If you would prefer delivery using a different carrier, please specify so in the order notes.\u003c\/p\u003e\n\u003cp\u003e🛑 As with most wargaming miniatures, especially those that require assembly, our products are not recommended for children. There might be minor sanding required, and there might need to be some minor craft knife work.\u003c\/p\u003e\n\u003cp\u003e❌ If product photos contain additional items to demonstrate scale (e.g. Dice, Terrain, additional models) they are not included in the purchase unless explicitly identified as being included.\u003c\/p\u003e\n\u003cp\u003e📐 The vast majority of products that we sell are primarily 28-32mm scale miniatures but can vary based on the designer. Some models may run a bit smaller or larger than expected. Where possible, the product photo or description will provide a measurement guide to assist, this might be with actually 'mm' measurements or by including a picture of a reference model.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is licensed to sell physical Prints of the digital files created by Den of Imagination.\u003c\/p\u003e\n\u003cp\u003eDISCLAIMER\u003c\/p\u003e\n\u003cp\u003eAll models are intended for use as proxies for any sci-fi\/fantasy\/DnD style table top game you choose.\u003c\/p\u003e\n\u003cp\u003eCT Miniatures UK is Not licensed, associated, affiliated, endorsed or encouraged by ANY Game company or Workshop\u003c\/p\u003e","brand":"Wildmesh","offers":[{"title":"5 Models","offer_id":50504305508695,"sku":null,"price":22.5,"currency_code":"GBP","in_stock":true},{"title":"10 Models","offer_id":50504305541463,"sku":null,"price":37.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/files\/background-editor_output_878a2ad9-0192-47de-bb96-001421a9c9a0.png?v=1759082198"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/9172\/6167\/collections\/ea8975c4dbb194bc9f847e60b1c7fe821df75f02.png?v=1757765609","url":"https:\/\/ctminiaturesuk.com\/collections\/wildmesh.oembed?page=5","provider":"CT Miniatures UK","version":"1.0","type":"link"}